01
Machine quality
Two machines may have similar specifications but very different construction quality.
MSME Machinery Technical Quality Inspection
Make better machinery decisions.
Independent technical guidance for buying, inspecting and improving industrial machinery.
From new machine evaluation and vendor assessment to existing machine health audits, Delhi Machines helps entrepreneurs and manufacturers make technically informed decisions.
- 0+ Years industrial experience
- B.E. Mechanical engineering expertise
- Inspection · Quality · Audit
Machine health
- Performance
- Reliability
- Safety
- Maintenance
Independent technical assessment
01 The problem
A machine can look good on paper. That doesn’t mean it will perform well.
Specifications, brochures and supplier claims don’t always tell the complete story.
02
Actual productivity
Claimed capacity and real-world output may not always be the same.
03
Reliability & maintenance
Poor components, fabrication or assembly can increase breakdowns and maintenance.
04
Investment risk
A machinery decision can affect productivity, quality, operating cost and machine life for years.
02 The Delhi Machines approach
We don’t start by selling you a machine.
We start by helping you understand it.
Delhi Machines is built around technical education, independent evaluation and professional machinery expertise — helping businesses understand quality, performance, maintenance, reliability and machine life before making important decisions.
- Education
- Evaluation
- Technical intervention
03 Services
Technical expertise when you need it.
From machine purchase decisions to existing equipment problems, our services are designed around the technical reality of machinery.
Service 01
New machine technical evaluation
Technical specification review, machine construction assessment, vendor technical evaluation and selection support.
Explore service : new machine technical evaluationService 02
Pre-dispatch inspection
Verify machine construction, components, workmanship, documentation and agreed specifications before dispatch.
Explore service : pre-dispatch inspectionService 03
Factory acceptance test
Witness machine trials and evaluate actual performance against agreed technical requirements.
Explore service : factory acceptance testService 04
Existing machine health audit
Assess machine condition, performance, reliability, maintenance, deterioration and operational issues.
Explore service : existing machine health auditService 05
Productivity & process assessment
Investigate machine-related productivity and quality problems and identify potential improvement areas.
Explore service : productivity and process assessmentService 06
Technical procurement support
Independent technical assistance during machinery procurement and supplier discussions.
Explore service : technical procurement supportNot sure which service you need?
Talk to a technical expert04 New machine journey
From machine selection to acceptance.
A structured technical route through a machinery purchase, with a defined checkpoint at every stage.
-
01
Requirement
Understand application, capacity and process.
-
02
Technical review
Review specifications and critical components.
-
03
Vendor evaluation
Assess technical capability and machine construction.
-
04
Inspection / FAT
Inspect and witness machine trials.
-
05
Pre-dispatch
Verify agreed requirements before shipment.
-
06
Acceptance
Support installation, commissioning and final acceptance.
05 Existing machines
Your existing machine is also an asset worth evaluating.
Not every machinery problem requires a new machine.
Delhi Machines Machine Health & Quality Audit
- Machine condition
- Productivity
- Quality
- Maintenance
- Reliability
- Safety
What we look for
- Excessive downtime
- Repeated breakdowns
- Poor output
- Quality variation
- Wear and deterioration
- Vibration / noise
- Maintenance issues
- Process-related problems
06 Deliverable
What you receive is a technical document, not an opinion.
Every audit closes with a written assessment: measured condition, observed performance, and the specific issues found on your machine — with the reasoning behind each conclusion.
Understand our assessment processConceptual sample — illustrative figures, not a customer report
Delhi Machines
Machine Health & Quality Audit
Ref
DM/SAMPLE/00
Machine condition82%
Performance74%
Reliability68%
Maintenance76%
Key observations
- Bearing wear detected
- Alignment requires attention
- Preventive maintenance improvement recommended
07 Knowledge
Before you buy a machine, learn how to evaluate one.
Practical machinery knowledge without sales pressure.
Machine quality
How to check machine quality before buying
The construction details that separate a well-built machine from one that only reads well on a specification sheet.
Read : how to check machine quality before buyingProductivity
Claimed capacity vs actual productivity
Why rated output and shop-floor output differ, and what to ask a supplier to demonstrate before you commit.
Read : claimed capacity vs actual productivityReliability
What makes a machine reliable?
Component selection, fabrication, assembly and design margin — the four things that decide breakdown frequency.
Read : what makes a machine reliableComponents
Bearings, motors & gearboxes — what should you check?
A component-level checklist for the parts that most often decide running cost and machine life.
Read : bearings, motors and gearboxesProcurement
Why two similar machines can have different prices
Where the money actually goes in a machine build, and how to read a price gap technically instead of emotionally.
Read : why two similar machines can have different pricesInspection
How to prepare for a factory acceptance test
What to agree in writing before the trial, and what to record while the machine is running.
Read : how to prepare for a factory acceptance testWalkthrough
Inspecting a machine at the supplier works
A walkthrough of what an inspection engineer actually looks at, in the order they look at it.
Watch : inspecting a machine at the supplier worksExplained
Reading a machine specification sheet
Which figures are commitments, which are typical values, and which mean very little.
Watch : reading a machine specification sheetShop floor
Signs an installed machine is deteriorating
Vibration, noise, heat and output drift — early indicators worth acting on.
Watch : signs an installed machine is deterioratingChecklist
MSME machine buying checklist
The technical questions to settle with a supplier before an order is placed.
Download : MSME machine buying checklistGuide
Preparing a technical purchase specification
How to write requirements that a supplier can be held to at acceptance.
Read : preparing a technical purchase specificationGuide
Planning maintenance for a new machine
Setting up spares, lubrication and preventive maintenance from day one.
Read : planning maintenance for a new machine
[Founder name — to be added] · Mechanical Engineer
08 The experience behind Delhi Machines
27+ years of industrial inspection, quality and engineering experience.
Delhi Machines is built on decades of practical exposure to industrial inspection, quality systems, audits, manufacturing environments and machinery assessment.
The objective is simple:
Bring professional industrial inspection thinking to entrepreneurs and MSMEs making machinery decisions.
- 0+
- Years experience
- Mechanical
- Engineer
- Industrial
- Inspection
- Quality &
- Audits
[Qualifications, certifications and industry credentials — to be added]
Book a technical discussion09 Who it’s for
Built for people who work with machinery.
Entrepreneurs
Buying their first machine
MSME owners
Improving existing production
Manufacturers
Facing performance issues
Procurement teams
Evaluating machinery vendors
Factory owners
Auditing existing equipment
Young entrepreneurs
Making their first machinery investment
Buying a machine?
Don’t rely only on the supplier’s brochure.
The MSME Machine Buying Checklist sets out the technical points to verify — construction, components, capacity, documentation and acceptance terms — before an order is placed.
10 Start here
Have a machinery question?
Whether you’re buying a new machine or facing problems with an existing one, start with a technical conversation.
- Technical consultationA structured discussion of your requirement or problem.
- Machine inspectionInspection at the supplier works before dispatch.
- Machine health auditCondition and performance assessment of installed equipment.
- Vendor / FAT evaluationSupplier capability review and witnessed machine trials.
Thank you.
Your technical requirement has been received. Our team will review the information and contact you shortly.
11 FAQ
Common questions.
Delhi Machines is primarily a technical consultancy and advisory platform. The focus is on helping customers understand, evaluate and assess machinery rather than operating as a conventional machinery seller.
Yes. Machines can be inspected at the supplier works before dispatch, and machine trials can be witnessed as part of a factory acceptance test, so that construction, components, workmanship and agreed specifications are verified before payment and shipment.
Yes. A machine health and quality audit assesses the condition, performance, reliability, maintenance practices and deterioration of equipment already installed in your plant, along with the operating and process factors around it.
MSMEs and first-time machinery buyers are the primary focus, because that is where independent technical guidance is hardest to find. Established manufacturers are also supported for inspection, audit and evaluation work.
Yes. Vendor evaluation looks at technical capability, machine construction, component selection, manufacturing practice and documentation, so that a supplier is judged on engineering evidence rather than on the brochure alone.
Yes. A single technical consultation is a complete service on its own. Many machinery questions can be clarified in one structured discussion, with no obligation to continue into inspection or audit work.
Better machinery decisions start with better technical questions.
Talk to Delhi Machines before you make a major machinery decision, or when an existing machine isn’t performing as expected.